,

Cisco Aironet AP2802E IEEE 802.11ac 1.30 Gbit/s Wireless Access Point

918.72

Cisco Aironet AP2802E IEEE 802.11ac 1.30 Gbit/s Wireless Access Point – 2.40 GHz, 5 GHz – MIMO Technology – 2 x Network (RJ-45) – Ethernet, Fast Ethernet, Gigabit Ethernet

Want a discount? Become a member!

918.72

AIR-AP2802E-E-K9C Overview

AIR-AP2802E-E-K9C is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. AIR-AP2802E-E-K9C provides external antenna and E regulatory domain. It also supports configurable Dual-band controller-based 802.11a/g/n/ac.

Quick Specs

Table 1

Product Code AIR-AP2802E-E-K9C
Feature Dual-band controller-based 802.11a/g/n/ac, configurable
Frequency band and 20-MHz operating channels E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

Antenna External Antenna
Features – 4×4 MU-MIMO with three spatial streams

– MRC

– 802.11ac Beamforming

– 20-, 40-, 80, 160-MHz channels

– PHY data rates up to 5.2 Gbps

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

Interfaces – 2 x 100/1000BASE-T autosensing (RJ-45)

– Management console port (RJ-45)

– USB 2.0 (enabled via future software)

System memory – 1024 MB DRAM

– 256 MB flash

Dimensions (W x L x H) 8.66 x 8.77 x 2.50 in.
Net Weight 4.6 lb (2.09 kg)

Product Details

Figure 1 shows the face of AIR-AP2802E Model.

AIR-AP2802E Face

Notes:

Dual-band antenna connector A with antenna Dual-band antenna connector C with antenna
Location of the Smart antenna connector port on the right side of the AP Status LED
Dual-band antenna connector D with antenna Dual-band antenna connector B with antenna

Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.

The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.

To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIR-CAB002-DART-R=, which is to be ordered separately.

Smart Antenna Connector and Cable

Compare to Similar Items

Table 2 shows the comparison between two AP.

Models AIR-AP2802E-E-K9C AIR-AP2802E-E-K9
Feature Dual-band controller-based 802.11a/g/n/ac, configurable Dual-band controller-based 802.11a/g/n/ac
Frequency band and 20-MHz operating channels E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

Antenna External Antenna External Antenna
Features – 4×4 MU-MIMO with three spatial streams

– MRC

– 802.11ac Beamforming

– 20-, 40-, 80, 160-MHz channels

– PHY data rates up to 5.2 Gbps

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

– 4×4 MU-MIMO with three spatial streams

– MRC

– 802.11ac Beamforming

– 20-, 40-, 80, 160-MHz channels

– PHY data rates up to 5.2 Gbps

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

 

AIR-AP2802E-E-K9C Specification

AIR-AP2802E-E-K9C Specification

Description 802.11ac Wave 2 AP w/CleanAir, 4×4:3, External Antenna, E Regulatory Domain, Configurable
Frequency band and 20-MHz operating channels E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

Software Cisco Unified Wireless Network Software Release 8.2.111.0 or later

Cisco IOS XE Software Release 16.3

Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches

Cisco Mobility Express

802.11n version 2.0 (and related) capabilities 4×4 MIMO with three spatial streams

Maximal ratio combining (MRC)

802.11n and 802.11a/g beamforming

20- and 40-MHz channels

PHY data rates up to 450 Mbps (40 MHz with 5 GHz)

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 dynamic frequency selection (DFS)

Cyclic shift diversity (CSD) support

802.11ac Wave 1 capabilities 4×4 MIMO with three spatial streams

MRC

802.11ac beamforming

20-, 40-, and 80-MHz channels

PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 DFS

CSD support

802.11ac Wave 2 capabilities 4×4 MU-MIMO with three spatial streams

MRC

802.11ac beamforming

20-, 40-, 80, 160-MHz channels

PHY data rates up to 5.2 Gbps

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 DFS

CSD support

Integrated antenna Flexible radio (either 2.4 GHz or 5 GHz)

2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth

5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately) 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

Cisco offers the industry’s broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios

Smart antenna connector Available on the 2802e Series access points only

Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point

Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio

Interfaces 2802I/E

2×100/1000BASE-T autosensing (RJ-45)

Management console port (RJ-45)

USB 2.0 (enabled via future software)

Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H) Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
Weight Cisco Aironet 2802i

3.53 lb (1.6 kg)

Cisco Aironet 2802e

4.6 lb (2.09 kg)

Input power requirements 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)

802.3at power injector (AIR-PWRINJ6=)

Power draw 26W at the PSE with all features enabled except for the USB 2.0 port

30W at the PSE with the USB 2.0 port enabled

Environmental Cisco Aironet 2802i

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

Operating temperature: 32° to 104°F (0° to 40°C)

Operating humidity: 10% to 90% (noncondensing)

Operating altitude test: 40˚C, 9843 ft.

Cisco Aironet 2802e

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

Operating temperature: -4° to 122°F (-20° to 50°C)

Operating humidity: 10% to 90% (noncondensing)

Operating altitude test: 40˚C, 9843 ft.

System memory 1024 MB DRAM

256 MB flash

Warranty Limited lifetime hardware warranty

The Aironet 2800 Series is packed with the features and capabilities that have made Cisco the industry leader, at a price point that is ideal for managing wireless growth, capacity, and coverage gaps in dense indoor environments.

SKU: AIR-AP2802E-E-K9C Categories: ,
General Information
Manufacturer Cisco Systems, Inc
Manufacturer Part Number AIR-AP2802E-E-K9C
Brand Name Cisco
Product Line Aironet
Product Series 2800
Product Model AP2802E
Product Name Aironet AP2802E Wireless Access Point
Product Type Wireless Access Point
Technical Information
Wireless LAN Standard IEEE 802.11ac
Frequency Band 2.40 GHz
Frequency Band 5 GHz
Wireless Transmission Speed 1.30 Gbit/s
MIMO Technology Yes
Beamforming Technology Yes
Interfaces/Ports
Ethernet Technology Ethernet
Ethernet Technology Fast Ethernet
Ethernet Technology Gigabit Ethernet
Number of Network (RJ-45) Ports 2
PoE (RJ-45) Port No
VGA No
HDMI No
USB No
Powerline No
Management Port Yes
Physical Characteristics
Height 63.5 mm
Width 220 mm
Depth 222.8 mm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.